Программа для управления wifi подключениями андроид
- 1 Программа для управления wifi подключениями андроид
- 1.1 Программа для управления wifi подключениями андроид.
- 1.2 Wireless Manager ME 6.4 for Windows (Without Installation)
- 1.3 Outside the home/office
- 1.4 How To Install WiFi-Manager on Windows 10
- 1.5 Tools for improving your WiFi connection
- 1.6 Recover a Wi-Fi password
- 1.7 2. How To Switch Off Your Wi-Fi Internet Connection
- 1.8 WifiManager сканер
Программа для управления wifi подключениями андроид.
Wireless Manager ME 6.4 for Windows (Without Installation)
This application supports wired or wireless connection of screen display images from a PC to the display.
The following describes the procedures for using the application without installing it in a PC.
By copying Wireless Manager ME6.4 to a removable media such as an SD Memory Card, the application can be used by connecting the removable media to a PC, without installing the application. If an older version of Wireless Manager is stored in the removable media, be sure to delete the entire folder containing the program from the media before copying the new version.
TH-80BF1, TH-65BF1, TH-50BF1, TH-80LFB70, TH-65LFB70, TH-50LFB70, TH-80LFC70, TH-65LFC70, TH-50LFC70
Version 6.4 (6.4.0 (16))
Click buttons below to check out version information.
Update information from Version 6.3 (6.3.0 (10))
• Performance Improvements
The computer must meet the following requirements in order to use the supplied software.
• The Japanese, English and Chinese versions of the above operating systems are supported.
* Proper operation of the application was confirmed using a Panasonic notebook PC preinstalled with Windows® 10.
If the Wireless Manager ME 6.4 is used without installed, no sound will be output.
The operation is slower than when the software is installed and used.
Downloading the Software
wmme64_s.zip (16.4 MB)
- Click the Download button above and the «Software Licensing Agreement» window will appear.
Select [Agree] and the installer will begin to download automatically.
- Once the installer has been downloaded, double click wmme64_s.zip. This will uncompress the installation files and create a folder named WMME6.4_s.
- Double-click «WMStart.exe» to launch Wireless Manager ME6.4.
The software starts up and operation is now possible using the same procedure as when the software was installed.
When a removable media was selected as the storage destination, insert it into the computer to be connected to the display so that it will be recognized. The software may start up automatically with some removable media.
Wireless Manager ME 6.4 Function chart
Outside the home/office
If you find yourself sometimes using your computer via an open public hotspot, you need a VPN — which protects your privacy by encrypting your online communications — to keep you safe. And if you’re using a for-pay hotspot, there is a way to keep the cost down if you’ve got more than one device.
There are plenty of for-pay VPN services, but if you don’t need to use one frequently, you can get by with a free one.
TunnelBear is one of my two favorites because of its simplicity. First, it offers clients for Windows, Macs, iOS and Android. Better than that, though, you can run it without downloading a client — just use a Chrome or Opera extension.
TunnelBear is an easy VPN to run: You can use a Chrome or Opera extension instead of a client.
Run the extension, turn on TunnelBear and you’re protected. When you want to stop, just turn it off. You get 500MB of VPN access free every month; if you want more than that, it costs $6.99 per month.
If you use TunnelBear regularly, you’ll find that 500MB a month doesn’t go very far. So if you don’t want to pay the $6.99 per month, CyberGhost is a good alternative — although with a few caveats.
CyberGhost is simple to use: Just download and install the client. (Note: In order to download the free version of the software, click the Free Download link on the upper-right hand of the CyberGhost home page.) You won’t even need to create an account; after you install the client, you’re ready to go. There are clients for Windows, Mac, iOS, Linux and Android.
There’s no limit to how much data you can use, but there is a limit on how long you can use it: After three hours of continuous use, you’re disconnected (although you can then reconnect). You may have to view ads in the client as well.
The free version of CyberGhost VPN doesn’t limit how much data you can use per month, but you are limited to three continuous hours of use at a time.
And if all of the VPN servers are busy, you’ll have to wait in line to start using it. I typically found wait times of less than five minutes, and occasionally I didn’t have to wait at all.
There are also two for-pay versions — Premium, which costs $6.99 per month, will work on only one device; while Premium Plus, which costs $10.99 per month, will work on up to five. Both versions are ad-free and offer unlimited data. They also are up to five times faster than the free version.
Connectify Hotspot Lite
Much as we like to think that free Wi-Fi is available everywhere we go, it’s not. Hotels, airplanes and coffee shops may charge fees, and you may need to pay more if you want to connect more than one device. It’s bad enough to pay for one device — do you really want to pay for several of them?
There’s an easy way around the problem — turn your computer into Wi-Fi hotspot.
Connectify Hotspot Lite offers a way to do it. Connect to a hotspot with your computer as you normally would, and you can then use Connectify Hotspot Lite to set up a Wi-Fi hotspot to which other devices connect — without additional fees.
However, there are a few hurdles you’ll need to clear first. To begin with, the Connectify home page is a bit confusing when it comes to figuring out how to download the free (Lite) version. At the top of the page are two buttons: Buy Now and Download. Click the Download button and install the app; you can then choose the Lite option during installation, which will let you share Wi-Fi hotspots.
Connectify lets you share a single Wi-Fi connection with multiple devices by creating a portable hotspot.
You won’t get other features such as being able to create custom hotspot names, the ability to share a wired connection and more. For that, you’ll need to buy one of the for-pay versions that range from $35 to $60.
Also note that when you install Connectify, you may get a message saying that Windows Firewall is blocking access to the app. If that happens, click the Allow Access button.
Finally, though, you can choose a name and password for your hotspot, click Start Hotspot and then other devices can connect. Connectify will show all of the devices that connect to it and give details about each, including the kind of device, its IP address, upload and download connection speeds, and how much data it has used.
Preston Gralla is a contributing editor for Computerworld and the author of more than 45 books, including Windows 8 Hacks (O’Reilly, 2012) and How the Internet Works (Que, 2006).
Программа давно уже поддерживает русскую локализацию, так что уже после первого запуска у вас сразу же отпадут все вопросы – интерфейс интуитивно понятен и имеет различные подсказки, а благодаря встроенным примерам вы сможете «пощупать», как работает та или иная функция.
Если говорить о базовых фишках, которые могут быть полезны обычному пользователю, то тут их более чем достаточно. Например, любому может быть интересна основная информация об окружающих устройствах, которые раздают интернет: скорость передачи и приема, производительность самого устройства и тому подобное. Кроме того, для более изощренных есть специальная система, позволяющая создавать профили с разными настройками, с которыми можно проводить довольно-таки интересные манипуляции.
Те, кто занимается разработкой программного обеспечения, связанного с беспроводными сетями, получат возможность полноценно пользоваться интерфейсом COM и доступ к использованию подключений, базирующихся на языках программирования, таких, как NET.
Благодаря инструментарию, встроенному в программу, вы можете создавать тонкие настройки и применять их к системе. Ну и, конечно же, стоит еще раз напомнить, что программа универсальна и подходить будет Wi-Fi Manager для Windows 7 и для 8, и для других, но не ниже XP.
В сети вы, конечно же, можете отыскать аналоги, однако стоит сразу учесть – в большинстве своем такие программы могут быть просто пустышками, которые содержат в себе вредоносный посторонний софт, а то и вовсе вирусы, так что стоит отыскать официальные источники, откуда можно совершать загрузку.
Например, ManageE Wi-Fi Manager, который вы можете загрузить по ссылке. Он является не менее универсальным решением, однако обладает только английским интерфейсом, так что это стоит учитывать.
Эта программа также поддерживает большое количество версий операционной системы Windows, так что теперь выбор за вами. Наиболее оптимальным способом выбора можно считать сравнение непосредственно во время работы с софтом, когда вы уже собственноручно разберетесь, что да как.
How To Install WiFi-Manager on Windows 10
Please note: you should Download and install WiFi-Manager app for Windows installation files only from trusted publishers and retail websites.
- First, open your favorite Web browser, you can use Firefox or any other
- Download the WiFi-Manager installation file from the trusted download button link on above of this page
- Select Save or Save as to download the program. Most antivirus programs like BitDefender will scan the program for viruses during download.
- If you select Save, the program file is saved in your Downloads folder.
- Or, if you select Save as, you can choose where to save it, like your desktop.
- After the downloading WiFi-Manager completed, click the .exe file twice to running the Installation process
- Then follow the windows installation instruction that appear until finished
- Now, the WiFi-Manager icon will appear on your Desktop
- Click on the icon to runing the Application into your Windows 10 PC.
Tools for improving your WiFi connection
WifiInfoView is a free, portable tool that allows you to scan nearby WiFi routers. Why’s that important? Well, if you’re living in an apartment building, or some other densely populated area, the big number of WiFi routers can actually have negative effects on each other, preventing you from having the best possible WiFi performance you can get from your router.
That’s where WifiInfoView comes in. This tool shows you info about all nearby WiFi routers, including their channel numbers, MAC addresses, and more. When you find out about other routers’ channels, and notice that there are so many routers using the same channel, you can change the channel of your WiFi connection, to take some load off your router.
If you don’t know how to change your WiFi channel, check out the third solution form this article. So, you just need to use info from WifiInfoView to see which is the most crowded nearby channel, and simply move your connection to another one. We’re sure you’ll notice better performance of your WiFi router once you do that.
WifiInfoView is available for free, and you can download it from this link.
ZamZom Wireless Network Tool
ZamZom is simple tool that allows you to see if anyone else (besides from you, and your household members) is connected to your WiFi network. That way, you can keep your WiFi network even more secure, and you’ll always know if someone is using your precious internet protocol.
In today’s world, with the wide range of tools, it is fairly easy for some people to break your WiFi password, and start using your internet. Especially if your WiFi password is weak. You probably know that the more people use your WiFi network, the poorer performance it will provide to you.
Since there’s no built-in tool in Windows 10 that allows you to see who’s connected to your WiFi, using this tool can be essential for blocking ‘thieves’ from stealing your internet. If you notice someone unknown is using your WiFi network, head over to your router’s settings, change your password, and use stronger security this time.
ZamZom is very simple, but still effective. It scans for connected devices in a couple of seconds, giving you accurate results in no time.
This tool is available for free, and you can download it from this link.
Ookla Speed test
This time, we have a web-based tool for you. This tool is called Ookla Speed Test, and as you probably can tell by its name, it gives you info about your connection speed.
Actual speed of your internet connection usually differs from what your provider listed (it’s slower), so it can be useful to determine the real situation. You connection speed can be even slower when you’re connected via WiFi, because of other potentially connected devices, just like we discussed above.
To test your internet speed with Ookla Speed test, just go to the site, run the test, and it will show you accurate results. The tool will show you both your upload and download speed, as well as the name of your internet provider.
No registration is needed for using Ookla Speed test, you just go to the site, and get the job done. There’s also an app for other platforms, including Android, iOS, and Windows 10, so you can test the signal strength in different areas of your home.
There are numerous tools like this around internet, but we think Ookla’s tool is the best choice. Of course, if you don’t agree with our opinion, look online for other internet speed testing tools.
InSSIDer Wireless Network Tool
InSSIDer Wireless Network Tool is another program for scanning your environment for other available networks. Its purpose is mainly the same as the purpose of above-listed WifiInfoView, but it offers some additional options. So, if you want your network finder to be more advanced, InSSIDer Wireless Network Tool is a great choice.
It will scan your surroundings for other wireless networks, and show you their MAC address, the router manufacturer (in most cases), the channel they’re using, the service set identifier (SSID) or public name of the network, what kind of security they’re using, the speed of the network and more.
So if you’re interested in analyzing other networks, and comparing them with your connection, this tool will make it possible. But of course, perhaps the most valuable info you can draw with InSSIDer Wireless Network Tool is the channel of other networks. When you determine which channel is the most used one, you can transfer your connection to another channel, to get better performance.
InSSIDER Wireless Network Tool is available for free, and you can grab it from this link.
Now it’s time for one troubleshooting tool. One of the best free WiFi troubleshooting tools you can find is the program called Wireless Wizard. This program scans and analyzes your WiFi connection, looks for potential issues, and tries to solve them.
Wireless Wizard allows you to analyze the network’s performance, so you can find out what to change, if results are not satisfying. Once the problem is detected, Wireless Wizard will (try to) quickly solve it, and make your WiFi network working normally again. Of course, that depends on complexity of the detected problem.
Just like some other programs from this list, Wireless Wizard allows you the best channel for your connection. It works similarly to Windows’ own network troubleshooting tool, but of course, with many more features and options. Additionally, you can also use this program to resolve interference issues with your network connection.
The Wireless Wizard works with the majority of home and business networks, as well as with most major carriers. The program is very easy to use, as it has a very simple and neat design, so you shouldn’t have any trouble getting around in the environment.
Xirrus Wi-Fi Inspector
Xirrus Wi-Fi Inspector is the third tool for scanning nearby networks on our lists. It is somewhere between WifiInfoView and InSSIDer Wireless Network Tool. So, if you want simple, straightforward, but also powerful tool, Xirrus Wi-Fi Inspector might be the right one.
Once you scan for the nearby networks with this tool, it will show you detailed info about them, including signal strength, the kind of network, the router manufacturer, the channel on which the network transmits and whether it’s an access point or an ad hoc network.
This tool can go even deeper by showing you info like, internal IP address, external IP address, DNS and gateway information of scanned networks, and more. You’ll definitely like the user interface, because it’s clean, simple and uses a ‘radar’ for scanning. Additionally, it also shows relative physical distance between you and each scanned network it found.
Xirrus is definitely simpler to use than InSSIDer, but the second one provides more detailed info about networks. So, if you just want to find out about channels of other networks, and don’t need a lot of additional information, Xirrus has the advantage.
Xirrus Wi-Fi Inspector is available for free, and you can download it from this link.
WeFi Wireless Networking Tool
We presented you enough tools for scanning all nearby networks, so you can choose the best option for you, depending on your needs. But WeFi is something similar, yet completely different. It allows you to search for hot spots in more distant locations.
For example, you’re going to a nice cafe in another part of the town, and you want to check their WiFi. Well, just use WeFi to find needed info. To find out about nearby networks at the selected location, just open the WiFi Maps tab in the program, enter address, and WeFi is going to show you all WiFi networks around. It will also give you various details about these networks, like type of the object ( hotel, café, etc.), distance from the location and whether a password is necessary.
Of course, it also has the ability to scan for networks near you, but since we have other tools for that on our list, the accent is not on this feature. It also has some additional features, like the ability to automatically connect to your favorite networks.
The program is free to use, but it also has a Paid version, which allows you to connect to WiFi networks that require paying a fee.
You can download or by WeFi Wireless Networking Tool from this link.
Connectify is a very useful tool, that allows you to turn your laptop into a WiFi hot spot! You’re probably familiar with doing this on your smartphone, but we’re sure you’d be glad to hear such thing is possible on Windows 10 PCs, as well.
Logically, a PC you’re turning into a WiFi hot spot needs to be connected to internet for Connectify to work. But what’s a very nice touch, it doesn’t necessarily have to be cable connection. So, it is enough for your computer to be connected to a WiFi network, and Connectify will turn your network card into a wireless transmitter.
Using Connectify is as simple as it gets. You just need to download the program, set up your hot spot’s name, password, and that’s it. Connectify will automatically start sending WiFi signal to nearby devices, using your network card. The program uses WPA2-PSK encryption, so you can be sure that only people how know the password will be able to connect.
Connectify is available for free, and you can download it from this link.
When you’re connected to a public network, there’s always a risk that someone might break into your device, and gain access to your data. That’s where Hotspot Shield comes in. This handy tool protects your data, by crating a secure VPN connection and encrypting all of your communications.
Running and using Hotspot Shield can’t be easier, you just need to open and turn it on. It will then automatically protect your data from potential attackers, by using the HTTP Secure (HTTPS) protocol.
However, not all users of this program are satisfied, because they’ve encountered some problems using it. First thing first, you need to dodge some bloatware when installing this software. Also, some users said that the program simply crashes and stops working for them. We haven’t experience such issues, but we must get you prepared, in case you’re not so lucky.
There are, of course, better programs for protecting your data than Hotspot Shield, but they all come with a price. So, if you’re looking for a free, and simple solution, Hotspot Shield is the right choice.
This program is available for free, so if you want to download it, head over to this link.
That’s about it for our list of the best WiFi tools for maximizing your network’s performance in Windows 10. As you were able to see, each of these programs (other than three WiFi analyzers) offers some unique, very useful operation for your router.
Do you agree with our list? Did we missed some cool program? Tell us in the comments.
RELATED STORIES YOU NEED TO CHECK OUT:
Recover a Wi-Fi password
Right-click on the Wi-Fi icon in the taskbar and choose Network and Sharing Centre, then click on the Wi-Fi connection listed. In the Wi-Fi Status dialog that pops up, click Wireless Properties, then open the Security tab. Click the Show Characters checkbox and the Network security key will show up as text you can read and copy.
See the password for your Wi-Fi connection
You can get the same information for the current connection or for other networks too, from an elevated command prompt. Right-click on the Windows button in the taskbar and choose Command Prompt (Admin) from the menu, then type in:
netsh wlan show profile
This will show the name of the Wi-Fi connection (and probably a lot of other recent connections, so find the right one). Copy that and use it instead of «Profile Name» when you type in this command, and you’ll see the password:
netsh wlan show profile name=»Profile Name» key=clear
Get hold of all your details at the command prompt
2. How To Switch Off Your Wi-Fi Internet Connection
This is another seamless process, which you can complete in only a few seconds. Here, there are two processes that you need to keep in mind. They include:
- Using the fly-out menu to disconnect
- Disconnection through the application settings
- Using The fly-out menu to disconnect
This is the simplest method of disconnecting your Wi-Fi connection. Just follow these simple processes:
a) Click on the wireless function on your computer’s notification area
b) Select your currently connected network
c) Then, on your network connection, click on the disconnect function
- Disconnection through the application settings
The other alternative is disabling your Wi-Fi connection using your computer’s application settings. Below are the steps you need to follow:
a) Open the settings application
b) Click on the Security and Networks function
c) Click on the Wi-Fi
d) Switch off the toggle function for the internet adapter that you wish to turn off
e) Use your drop-down menu to choose the option to turn on your on-schedule wireless internet adapter
Security Task Manager показывает все запущенные сервисы Windows, включая внедренные скрытые приложения (например, мониторинг клавиатуры или браузера, авто вход). Уникальный рейтинг надежности указывает на вероятность того, что процесс потенциально может быть вредоносной программой-шпионом, кейлоггером или трояном.
Бесплатный aнтивирус находит и удаляет неактивные программы-шпионы, рекламу, трояны, кейлоггеры, вредоносные и следящие программы с вашего жесткого диска. Идеальное дополнение к Security Task Manager.
Reimage бесплатное сканирование, очистка, восстановление и оптимизация вашей системы.